Overview

You may need to configure a failover IP address on your instances, for one of the following reasons:
  • you have a large number of websites on your instance,
  • you host international projects,
In order to do this you can either buy or import a failover IP address for your Public Cloud instances.

However failover IPs will not be automatically configured on your instance.

This guide explains how to configure your instance's network interface so that a failover IP can be allocated to it.
.

Requirements

Configuring the failover IP

.

Configuring the interface

  • Edit the configuration file with the following command:
  • vi /etc/network/interfaces

  • Add the following lines to the end of the file:
  • auto ethX:Y
    iface ethX:Y inet static
    address xxx.xxx.xxx.xxx
    netmask 255.255.255.255
    broadcast xxx.xxx.xxx.xxx

# Variables #Values
X main interface number (usually eth0 )
xxx.xxx.xxx.xxx failover IP to configure
Y the number of the alias (starting at 0 and then 1 etc. depending on the number of IPs there are to configure)
If you have many IPs to allocate, they must be added on the same line:
by increasing the value of Y (the alias number)
.

- Restart the network services with the command:

  • Restart the network services with the command:
  • service networking restart

View also

Go back to the index

Error, link to guide #1785 not found.